For fun I just tried plugging Dexter into the Beagleboard and I was very happy to see that it autodetected the USB serial port. I was able to see some Dexter chatter using minicom. This was expected but is still very exciting. It validates my decision to use a USB serial port on the Dexter board instead of a traditional DB9 port (which are rapidly becoming obsolete).
[68528.769439] usb 1-2.3: new full speed USB device using ehci-omap and address 4
[68528.973022] usbcore: registered new interface driver usbserial
[68528.973175] USB Serial support registered for generic
[68528.981475] usbcore: registered new interface driver usbserial_generic
[68528.981506] usbserial: USB Serial Driver core
[68529.004516] USB Serial support registered for FTDI USB Serial Device
[68529.008178] ftdi_sio 1-2.3:1.0: FTDI USB Serial Device converter detected
[68529.008605] usb 1-2.3: Detected FT232RL
[68529.008636] usb 1-2.3: Number of endpoints 2
[68529.008636] usb 1-2.3: Endpoint 1 MaxPacketSize 64
[68529.008666] usb 1-2.3: Endpoint 2 MaxPacketSize 64
[68529.008666] usb 1-2.3: Setting MaxPacketSize 64
[68529.010101] usb 1-2.3: FTDI USB Serial Device converter now attached to ttyUSB0
[68529.016174] usbcore: registered new interface driver ftdi_sio
[68529.016204] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
No comments:
Post a Comment